Böwe Bell + Howell Truper 3200 Cleaning Manual page 11

Cleaning Guide for NCR™ Type Paper Residue
Part II Cleaning the Drive Rollers
Please review the accompanying video for an in-depth visual of the following
instructions:
1. Take one of the lint free cloths (S005660) and a ¼"
flathead screwdriver (not supplied).
2. Cover the screwdriver tip with the lint free cloth. (See Image A)
3. Apply the screwdriver flat head surface (covered with the cloth) to the roller with
the flathead tip running parallel to the rollers surface.
4. Run across the rollers surface with the screwdriver tip and apply gentle force to
lift off access NCR residue at each run. (See Image B)
5. Only clean across the surface as illustrated below.
Note:
Scrub the surface across in a single direction. DO NOT run from side to side
for this may damage the rollers.
S006881 11 of 7