Böwe Bell + Howell Truper 3200 Cleaning Manual page 14

3 Cleaning the Scanner
3.3 Cleaning the Front ADF (Exit) Section
To clean the front ADF (Exit) section, perform the following:
1 Lift or fold the Hopper Tray to its upright position (see image below)
Pull the Exit Door Release handle towards you to release the Exit Door
Lift the Exit Door in the direction of the arrow (see image below) to its open-most
position
Follow instructions from Part I and Part II to clean the "free" and "drive" rollers.
Cleaning Direction
When finished, wipe all areas inside the scanner with a mild solution of soap and water.
This will prevent any further damage to the rollers from any chemical reactions of the
cleaning agents.
S006881 14 of 7