Advertisement
6. Remove the screws and the pocket from the
audio unit. Discard the pocket and pocket
screws.
POCKET
(Discard.)
7. Remove and discard the shipping screw and
wrapper from the CD player.
8. Place the audio unit on top of the CD player.
Slide the right and left brackets over the CD
player, and install the four screws supplied with
the CD player.
CD PLAYER
2 of 2
SCREWS
(Discard.)
SHIPPING SCREW
(Discard.)
WRAPPER
(Discard.)
9. Plug the 12-pin connector from the CD player
into the back of the audio unit.
10. Plug the 16-pin connector and the antenna
lead into the audio unit, then reinstall the audio
unit.
11. Reinstall the lower cluster assembly.
12. Reconnect the negative cable to the battery.
13. Check that the CD player operates according
to the owner's manual supplied with the CD
player.
14. Reset the clock and the radio station presets.
15. Put the CD player owner's manual in the glove
box for your customer.
AII 20161 (9810)
1998 American Honda Motor Co., Inc. – All Rights Reserved
16-PIN
CONNECTOR
ANTENNA LEAD
12-PIN CONNECTOR
FROM CD PLAYER
Advertisement
