TARGUS WIRELESS RF MOUSE Introduction Congratulations on your purchase of a Targus Wireless RF Mouse. This ergonomically designed mouse uses a radio frequency (RF) link that enables you to use the mouse anywhere within three feet of its receiver. No line-of-sight between the mouse and its receiver is required.
Targus Wireless RF Mouse Installing the Batteries 1 Remove the battery cover from the top of the mouse by pressing the battery cover hinge, located on the bottom of the mouse, and sliding it off. Battery cover hinge Battery cover...
Targus Wireless RF Mouse Using the Charger Base For best results, you should charge the RF mouse for at least four hours before using the mouse. NOTE: Using the charger base is optional. If you are using the mouse without the charger base, you may use disposable batteries.
Targus Wireless RF Mouse Installing the Device Drivers ® Windows 98/Me Operating Systems 1 Turn on your computer. The Add New Hardware Wizard appears. If it does not, the operating system has installed the default driver automatically. No other steps are necessary.
Page 6
Targus Wireless RF Mouse You are now ready to set the radio frequency channel and establish a communications link between the mouse and its receiver. See “Establishing a Communications Link” on page 6 Establishing a Communications Link After your computer detects the USB receiver and the driver...
Targus Wireless RF Mouse CAUTION: Pressing and holding the reset button longer than 1.5 seconds may cause the mouse to enter power off mode. See “Mouse Power Management” on page 7. Reset button Sample mouse bottom The mouse’s red light emitter diode (LED) stops glowing when you press the reset button and resumes glowing when the button is released.
Targus Wireless RF Mouse Operating Hints For optimal performance and RF reception: • Place the receiver at least 8 inches (20 cm) away from all electrical devices, such as your monitor, speakers or external storage devices. If necessary, use a three-inch extension cable to place the receiver away from the computer.
Targus Wireless RF Mouse Comfortable Usage Research suggests that physical discomfort and injury to nerves, tendons, and muscles may be related to repetitive motion, an improperly set up work area, incorrect body posture or poor work habits. To reduce the risk of injury, follow these precautions: •...
Targus Wireless RF Mouse for two seconds. See “Mouse Power Management” on page 7. • Always synchronize the mouse and its receiver after changing the batteries. Sleep Mode • The mouse’s sleep mode feature activates after 20 minutes of non-operation.
Targus Wireless RF Mouse Weight Mouse (without batteries): 3.74 ounces (106 grams) Receiver: 0.56 ounces (16 grams) Receiver Interface USB version 1.1 Operating Voltage Mouse: 3.6V DC Receiver: 4.5 to 5.5 DC (powered by the USB port) Batteries 2 AA NiMH...
Page 12
Targus Wireless RF Mouse • Check that the receiver’s USB connector is firmly attached to the USB port on your computer. • Verify that the device drivers are installed. • Make sure you have established a radio link between the mouse and its receiver.
(if applicable). Warranty Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss.
Page 15
Targus Wireless RF Mouse If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •...
Need help?
Do you have a question about the Wireless RF Mouse and is the answer not in the manual?
Questions and answers