Summary of Contents for Targus Wireless Laser Rechargable Notebook Mouse
Page 1
Wireless Laser Rechargeable Notebook Mouse USER GUIDE...
Page 2
CAUTION LASER RADIATION. DO NOT STARE INTO BEAM VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS I LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH...
WIRELESS LASER RECHARGEABLE NOTEBOOK MOUSE Introduction Congratulations on your purchase of the Targus wireless laser rechargeable ergonomically designed mouse uses a radio frequency (RF) link that enables you to use the mouse anywhere within 1 m of its receiver. No line-of-sight between the mouse and its receiver is required.
Wireless Laser Rechargeable Notebook Mouse NOTE: T HE THIRD BUTTON AND THE SCROLLING WHEEL ONLY WORK WITH THE OPERATING SYSTEMS LISTED ABOVE DIFFERENT OPERATING SYSTEM FUNCTION AS A STANDARD Connecting the Mouse Receiver To connect the mouse receiver: 1 Plug the USB receiver into an available USB port on your computer.
Page 5
Wireless Laser Rechargeable Notebook Mouse NOTE: T HE BATTERY COVER IS ALSO THE TOP COVER OF THE MOUSE OPEN 3 Insert the supplied batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing.
Page 6
Wireless Laser Rechargeable Notebook Mouse Operating Notes for Wireless Mice with Recharging Feature via USB Cable 1. Charge the mouse for at least 8 hours before using it. And please make sure only rechargeable batteries (the ones that come with your product) are used.
Wireless Laser Rechargeable Notebook Mouse Charging the Batteries For best results, you should charge the mouse at least 8 hours before using it. You can do this via the supplied USB charge cable. To do this: 1 Connect the cable’s USB connector into an available USB port on your computer 2 Connect the other end to the mouse.
Wireless Laser Rechargeable Notebook Mouse 1 Press and release the link button located on the bottom of the receiver. The receiver’s status light blinks when the receiver is activated. 2 Press and release the link button, located on the bottom of the mouse. You are now ready to use the mouse.
Wireless Laser Rechargeable Notebook Mouse Operating Hints For optimal performance and RF reception: • Place the receiver at least 20cm away from all electrical devices, such as your monitor, speakers or external storage devices. • If necessary, use the supplied extension cable to keep the receiver away from the computer.
Wireless Laser Rechargeable Notebook Mouse Comfortable Usage Research suggests that physical discomfort and injury to nerves, tendons, and muscles may be related to repetitive motion, an improperly set up work area, incorrect body posture, and poor work habits. To reduce the risk of injury, follow these precautions: •...
Page 11
Wireless Laser Rechargeable Notebook Mouse • Check that the receiver’s USB connector is firmly attached to the USB port on your computer. • Verify that the device drivers are installed. • Make sure you have established a radio link between the mouse and its receiver.
Page 12
Wireless Laser Rechargeable Notebook Mouse I can’t use the mouse while another RF mouse is in use – what should I do? • Reset the identification code. See “Establishing a Communications Link”.
This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to a devices nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility.
Need help?
Do you have a question about the Wireless Laser Rechargable Notebook Mouse and is the answer not in the manual?
Questions and answers