Mouse Power Management - Targus Wireless RF Mouse User Manual

CAUTION: Pressing and holding the reset button longer than
1.5 seconds may cause the mouse to enter power off mode.
See "Mouse Power Management" on page 7.
The mouse's red light emitter diode (LED) stops glowing
when you press the reset button and resumes glowing when
the button is released.
You are now ready to use the RF mouse.

Mouse Power Management

To power the mouse off, wake the mouse (if it's in sleep
mode), press and hold the reset button for at least two seconds.
Then, release the reset button when the red LED flashes one
time.
To power the mouse on, press and release the reset button so
that the red LED glows.
Targus Wireless RF Mouse
Sample mouse bottom
7
Reset button