Strike Time; Talk Time - Chamberlain Icon26 series Owner's Manual

Strike Time sets the amount of time your gate or door relay will be held open.
In the Program Selection
Screen (fig a.), Press the
S
key.
The strike time can be set for
both gates and doors (fig b.)
D
Press the key to set the Door Strike Time. Type in
a time from 1 to 99 seconds (fig c.). Press the
key to enter your selection.
DOOR STRIKE TIME:
[01-99] 10 Seconds
DOOR NAME/LOCATION
South Entry Door
For either the Gate or Door Strike TIme, you may now type in a name and location (up to 13 characters) to which you want
the programmed strike time applied. (fig e.) and (fig f.) Press the
You can set the amount of time to talk on the Entry Phone at 20, 40, or 80 seconds.
SELECT PROG MODE:
(T)Talk Time
In the Program Selection Screen (fig g.), Press the
B
for 40 seconds, or

STRIKE TIME

SELECT PROG MODE:
(S)Strike Time
Door Strike Time > D
Gate Strike Time > G
(fig c.)
(fig e.)

TALK TIME

(fig g.)
T
C
for 80 seconds (fig h.). Press the
G
Press the key to set the Gate Strike Time. Type in
a time from 1 to 12 seconds (fig d.). Press the
key to enter your selection.
GATE STRIKE TIME:
[01-12] 05 Seconds
GATE NAME/LOCATION
North Side Gate
TALKTIME IS
(B)40 Sec (C)80 Sec
key. Choose the desired Talk Time, press
key to confirm your entry.
Icon Page
33
(fig a.)
(fig b.)
key to complete the transaction.
20 SEC
A
for 20 seconds,
(fig d.)
(fig f.)
(fig h.)