biodex rtm 600 Operation Manual page 19

CONTENTS
To advance to the Configuration screen from the Utilities Menu, touch <Configuration>. Enter 781
at the "Access ID Code" prompt and touch <OK>. The Configuration screen should now be dis-
played. This screen allows the user to choose between various display options and to set specific
parameters for a variety of treadmill functions.
Following is a description of Configuration screen options. Once all parameters and values are set
as desired, touch <Back> to exit and return to the Utilities Menu. Touch <Back> again to return to
the Main Menu.
configuration screen parameters
Figure 7.3. The Set Test/Exercise Complete Screen Time Out screen.
Set Screen Time Out: Touch this option to advance to the Set Test/Exercise Complete Time Out
Screen. This setting determines how long the Exercise Results screen will be displayed before the
screen saver kicks in following completion the exercise session. Default is 1:00 minute but the
range can be adjusted from 0:00 to 30:00 minutes. Touch the < >or <M> icons to increase or
decrease the value. Touch <OK> to continue and return to the Configuration screen.
Screen Saver: The setting determines how long the display screen remains ON when the
system is no longer in use. Once the selected time expires, the screen fades to black even if the
system remains ON.
1. At the Configuration Screen, touch <Screen Saver>.
Use the < ▲> or < ▼> arrows to increase or decrease the value displayed in 1 minute
2.
increments. The Time Out range is from 00:00 to 60:00.
3. Touch <OK> to confirm your changes and return to the Configuration screen. Touch
<Cancel> to return to the Configuration screen without making any changes.
Set Date/Time: Touch <Set Date/Time> to change the system time or date. Touch to highlight the
value to change, then use the < >or < > icons to increase or decrease the value as desired. Touch
<OK> to return continue and return to the Configuration screen.
RTM 600 UTILITIES — 7-2 —