Belkin F6D4230-4 User Manual page 85

TRoUblEsHooTINg
sections
table of contents
Problem:
I can't connect to the Internet wirelessly, but my network name is listed�
solution:
If the name of your network is listed in the "Available Networks" list, please
follow the steps below to connect wirelessly:
1 Click on the correct network name in the "Available Networks" list�
2
If the network has security (encryption) enabled, you will need to enter
the network key� For more information regarding security, see the
section entitled "Changing the Wireless Security Settings"�
3 Within a few seconds, the tray icon in the lower, right-hand corner of
your screen should turn green, indication of a successful connection
to the network�
150N Wireless Router
1 2 3 4 5 6
Problem:
I can't connect to the Internet wirelessly, and my network name is not listed�
solution:
If the correct network name is not listed under "Available Networks" in the
wireless utility, please attempt the following troubleshooting steps:
1 Temporarily move computer, if possible, five to 10 feet from the
Router� Close the wireless utility, and reopen it� If the correct network
name now appears under "Available Networks", you may have a range
or interference problem� Please see the suggestions discussed in the
section titled "Placement of your Enhanced Wireless Router" of this
User Manual�
2 Using a computer that is connected to the Router via a network cable
(as opposed to wirelessly), ensure that "Broadcast SSID" is enabled�
This setting is found on the Router's wireless "Channel and SSID"
configuration page�
If you are still unable to access the Internet after completing these steps,
please contact Belkin Technical Support�
83
7 8 9 10