Table of Contents
Advertisement
UsINg THE WEb-basEd adVaNCEd UsER INTERfaCE
sections
table of contents
Using the access Point Mode
Note: This advanced feature should be employed by advanced users only� The Router can be configured to work as a wireless network access point�
Using this mode will defeat the NAT IP sharing feature and DHCP server� In AP mode, the Router will need to be configured with an IP address that is in the
same subnet as the rest of the network that you will bridge to� The default IP address is 192�168�2�254 and subnet mask is 255�255�255�0� These can be
customized for your need�
1
Enable the AP mode my selecting "Enable" in the "Use as Access
Point only" page� When you select this option, you will be able to
change the IP settings�
2
Set your IP settings to match your network� Click "Apply Changes"�
3
Connect a cable from the WAN port on the Router to your
existing network�
The Router is now acting as an access point� To access the Router
advanced user interface again, type the IP address you specified into your
browser's navigation bar� You can set the encryption settings, MAC address
filtering, SSID, and channel normally�
150N Wireless Router
1
2
3
4
5
6
48
7
8
9
10
Hide quick links:
Advertisement
Table of Contents
