Setting Mac Address Control - Belkin F6D4230-4 User Manual

UsINg THE WEb-basEd adVaNCEd UsER INTERfaCE
sections
table of contents

setting MaC address Control

The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the wireless network� Note: This list applies
only to wireless computers� This list can be configured so any computer attempting to access the wireless network that is not specified in the filter list will
be denied access� When you enable this feature, you must enter the MAC address of each client (computer) to which you want to allow network access� The
"Block" feature lets you turn on and off access to the network easily for any computer without having to add and remove the computer's MAC address from
the list�
150N Wireless Router
1 2 3
(1)
(2)
(3)
(4)
(5)
4 5 6
setting up an allow access list
1 Select the "Allow" radio button (1) to begin setting up a list of
computers allowed to connect to the wireless network�
2 Next, in the "MAC Address" field that is blank (3), type in the MAC
address of the wireless computer you want to be able to access the
wireless network, then click "<<Add" (4)�
3
Continue to do this until all of the computers you want to add have
been entered�
4 Click "Apply Changes" (5) to finish�
49
7 8 9 10