Targus USB calculator/keypad User Manual page 3

Connecting the Calculator Keypad
to Your Computer
1 Turn off your computer (if it's turned on).
2 Remove the USB connector from its recess in the back of the
keypad and guide the cable through one of the three cable
grooves. Use the groove that is closest to your computer.
Cable
groove
Wheel
grip
3 Extend the cable to the desired length.
4 Plug the standard USB end of the cable (
available USB port on your computer.
You are now ready to turn on your computer and install the keypad
driver.
USB Calculator/Keypad - back view
RESET
3
Cable
grooves
USB connector
recess
) into an