Table of Contents
Advertisement
Device Not Working
• Make sure that the device is firmly connected to the port on the
mini hub.
• Plug the device into a different port on the mini hub. If it still
doesn't work, test the device by connecting it directly to your
computer.
• Check that you ran the Setup or Install program for the device.
• Make sure that the device appears in Device Manager. See
"Verifying Device is Installed" below.
• Disconnect all devices from the mini hub and reconnect them,
one at a time. Check that each device works before plugging in
the next one.
Verifying Device is Installed
®
Windows
Operating System
To check that the mini hub is installed properly, use Device
Manager to locate the Generic USB Hub on USB 2.0 Bus device.
To access Device Manager for the Windows
system, right-click My Computer, Properties, and then click the
Device Manager tab.
For the Windows
Computer, Properties, click the Hardware tab, then click the
Device Manager button.
To test that the mini hub is working properly, in the Device
Manager window:
1 Select the Generic USB Hub on USB 2.0 Bus device.
2 Click the Properties button or icon, depending on your
operating system.
3 Verify that the message "This device is working properly"
appears.
®
2000/XP operating system, right-click My
7
®
98/Me operating
Advertisement
Table of Contents
