Table of Contents
Advertisement
System Requirements
To use the mini hub, your computer must meet the following
hardware requirements and run one of the operating systems
listed below.
Hardware
• PC with a 233 MHz or faster Intel
Pentium
®
and a hard disk drive
• 64 MB RAM or higher, depending
on the operating system
• USB version 2.0 interface
NOTES: The USB 2.0 Mobile Mini Hub is backward
compatible, so you can connect it to a computer with either a
version 1.1 or 2.0 USB interface.
When using the mini hub with a computer that has a version
1.1 USB interface, all of the devices attached to the mini hub
will run at a version 1.1 USB speed.
Connecting the Mini Hub to Your
Computer and Installing the
Default Device Drivers
To connect the mini hub to your computer and install the
operating system's default drivers:
1 Plug the supplied high-speed cable's USB connector end
(type A) into a USB port on your computer.
processor or equivalent
Operating System
®
• Windows
2000/XP
• Mac OS X and higher
3
®
98SE/Me/
Advertisement
Table of Contents
