Making A Call Alert With The One Touch Access Button; Emergency Operation - Vertex Standard VXD-7200 Operating Manual

1 Making a Call Alert with the One Touch
Access Button
Procedure:
1 Press the programmed One Touch Access but-
ton to make a Call Alert to the predefined alias
or ID.
2 The display shows "Call Alert: <Subscriber Alias
or ID>", indicating that the Call Alert has been
sent.
3 The green LED lights up when your radio is
sending the Call Alert.
4 If the Call Alert acknowledgement is received,
a tone sounds and the display shows "Call Alert
Successful".
OR
If the Call Alert acknowledgement is not re-
ceived, a tone sounds and the display shows
"Call Alert Failed".
54
n

Emergency Operation

An Emergency Alarm is used to indicate a critical
situation. You are able to initiate an Emergency at
any time on any screen display even when there is
activity on the current channel.
Your dealer can set the duration of a button press
for the programmed Emergency button, except for
long press, which is similar with all other buttons:
• Short press – Between 0.05 seconds and 0.75
seconds
• Long press – Between 1.00 second and 3.75
seconds
The B button is assigned with the Emergency On/
Off feature. Check with your dealer for the as-
signed operation of the Emergency button.
If short press the Emergency button is assigned to
turn on the Emergency mode, then long press the
Emergency button is assigned to exit the Emer-
gency mode.
If long press the Emergency button is assigned to
turn on the Emergency mode, then short press the
Emergency button is assigned to exit the Emer-
gency mode.