Vertex Standard VXD-7200 Operating Manual page 10

Your Vertex Standard two-way radio complies with the following RF energy exposure standards and
guidelines:
Ÿ United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-
part J
Ÿ American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95.
1-1992
Ÿ Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
Ÿ International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
Ÿ Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromag-
netic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999
Ÿ Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Expo-
sure) Standard, 2003
Ÿ ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) "additional requirements for SMR,
cellular, and PCS product certification."
RF Exposure Compliance and Control Guidelines and Operating Instructions
To control exposure to yourself and others and to ensure compliance with the RF exposure limits, always ad-
here to the following procedures.
Guidelines:
Ÿ User awareness instructions should accompany device when transferred to other users.
Ÿ Do not use this device if the operational requirements described herein are not met.
Instructions:
Ÿ Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk
(PTT) button or, for radios equipped with VOX, speak into the microphone. The red LED will illuminate
when the radio is transmitting. To receive calls, release the PTT button, or, for radios equipped with VOX,
stop talking. The red LED will extinguish when the radio stops transmitting. Transmitting 50% of the time,
or less, is important because this radio generates measurable RF energy exposure only when transmitting
8