Call Alert Operation; Receiving And Responding To A Call Alert; Making A Call Alert From The Contacts List - Vertex Standard VXD-7200 Operating Manual

n

Call Alert Operation

Call Alert paging enables you to alert a specific ra-
dio user to call you back when they are able to do
so.
This feature is applicable for subscriber aliases or
IDs only and is accessible through the menu via
Contacts or manual dial.

1 Receiving and Responding to a Call Alert

When you receive a Call Alert page, you see "Call
Alert" that alternates with the alias or ID of the call-
ing radio on the display.
Procedure:
1 You hear a repetitive tone. The yellow LED
blinks.
2 Press the PTT button within four (4) seconds of
receiving a Call Alert page to respond to the Pri-
vate Call.
OR
Press to exit the Call Alert.
ENTER

1 Making a Call Alert from the Contacts List

Procedure:
1 to access the menu.
MENU
2 or to "Contacts" and press
lect.
3 or to the required subscriber alias or
ID and press [ OK ] to select.
4 or to "Call Alert" and press
lect.
5 The display shows "Call Alert: <Subscriber Alias
or ID>", indicating that the Call Alert has been
sent.
6 The green LED lights up when your radio is
sending the Call Alert.
7 If the Call Alert acknowledgement is received,
a tone sounds and the display shows "Call Alert
Successful".
OR
If the Call Alert acknowledgement is not re-
ceived, a tone sounds and the display shows
"Call Alert Failed".
to se-
ENTER
to se-
ENTER
53