Operation - Trane TZEMT400AB32MAA User Manual

Operation

The model TZEMT400AB32MAA thermostat provides typical thermostat control of a central heating and cooling HVAC
system. This thermostat also features a Z-Wave™ module for remote control.
Clock Display
Status Indicator
Dynamic Labels
Normally, the thermostat displays the thermostat control screen as shown above.
Item
Clock Display
Status Indicator LEDs
Dynamic Labels and
Function Control Buttons
Setpoint Display and
Setpoint Up/Down
Buttons
Temperature Display
Thermostat User Guide
11:15 AM
Sys Off
Run
LEDs
Filter
MENU
Function Control Buttons
Description
The current time is displayed in the upper
left corner of the main screen. The time will
blink when the clock has not been set.
The thermostat has four LEDs that display
status information. The LEDs have dynamic
labels.
The buttons are defined by the dynamic
labels above each button. As you navigate
through menus, the labels for the buttons
will change.
The current heat and cool setpoints are
displayed. These setpoints may be set
using the Z-Wave control system, the
thermostat's internal schedule, or by
pressing the Setpoint Up/Down buttons. In
HEAT mode, the Setpoint Up/Down buttons
change the heat setpoint. In COOL mode,
they change the cooling setpoint. In AUTO
mode, the buttons change the last call's
heating or cooling setpoint.
The thermostat displays the current
temperature as sensed by the internal
temperature sensor.
72
77 H
74 C
AUTO AUTO
MODE FAN RUN
Notes
See
information.
See
information.
The setpoints will push each other if they
are adjusted to within the minimum heat/
cool separation setting. This is normally 3
degrees.
The internal schedule is disabled by
default. See
information.
The internal temperature sensor can
be adjusted as necessary. See
Calibration
Tempurature
Display
Setpoint
Up/Down Buttons
Setpoint Display
Set Clock on page 7 for more
LED Reference on page 25 for more
Schedules on page 21 for more
on page 12 for more information.
Sensor
3