TEC MA-600 Series Owner's Manual page 96

3. READ (X) AND RESET (Z) REPORTS
Zone PLU Read or Reset (Daily)
Read Report Sample
• Operation: Mode Lock:
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON
X_PLU_ZONE
0001->0100
0001
Tomato
3
0002
Lemon
1
TOTAL
-TOTAL
X for read
Z for reset
When the ECR is being outside a sale and in X mode, depress the
[1] or [Enter] key.
Select "PLU" with the [↓] or [↑] key, then depress the [7] or [Enter]
key.
Select "ZONE PLU" with the [↓] or [↑] key, then depress the [2] or
[Enter] key.
Enter a zone-start PLU code (4 digits), then depress the [x] key.
Enter a zone-end PLU code (4 digits), then depress the [AT/TL] key.
For this sample
Mode Lock: X or Z
(for Daily)
0001 [X]
0100 [AT/TL]
#3001
Zone-start PLU Code -> Zone-end PLU Code
PLU Code
PLU Name
€0,50 Item Count, Amount
€1,00
Total Item Count and
4
€1,50 Amount of Total of all PLUs read in this report
Negative Total Item Count and
0
€0,00 Amount of Total of all PLUs read in this report
9999 19:00TM
NOTE: In Zone PLU Read Reports:
• PLUs of zero sale will be skipped.
• PLUs not existing in the PLU Program File memory
will not be printed in reports (in any reports).
3-17
EO1-11154
3.2 General Notes On Report Takings