TEC MA-600 Series Owner's Manual page 135

4. PROGRAMMING OPERATIONS
3) Example
To program "White" on Salesperson Code 01:
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key four times.
Depress the [5] or [Enter] key.
Depress the [Enter] key.
(Salesperson 01 is selected.)
The [C] key depression clears the
salesperson name already
programmed.
Input a desired name.
The [Enter] key depression results in
that the input name is entered and
displayed.
LCD Display
(continued on the next page)
4-37
4.14 Salesperson Name Programming
Remarks
The cursor is moved on to "2 NAMES".
The cursor is moved on to
"5 SALESPERSON NAME".
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
The salesperson name already programmed
is displayed.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[W] [A/a] [h] [I] [t] [e] [Enter]
When the [Enter] key is depressed, the
programmed data is printed.
EO1-11154