TEC MA-600 Series Owner's Manual page 13

5. DISPLAY
Error Message
(Standard Setting)
OPERATION ERROR
MANAGER REQUIRED
CLOSE DRAWER
COMPULSORY CODE
MISC ERROR
PC COMM ERROR
CODE ERROR
DRAWER LIMIT
CONSIGNMENT
COMPULSORY
COMPULSORY SLIP
PAPER END
← RECEIPT
COVER OPEN
← RECEIPT
HEAD OPEN
JOURNAL →
PAPER END
JOURNAL →
SLIP OFF LINE
SLIP PAPER OUT
ST COMP
SALESPERSON COMP
FIN R/A PROHIBIT
MDR COMP
PRICE INPUT
PROHIBIT ERROR
NO PRICE INPUT
MODE-CH PROHIBIT
SALES-P PROHIBIT
TOTAL ONLY
TENDER ONLY
SH_TEND PROHIBIT
OV_TEND PROHIBIT
ERROR MESSAGE TABLE
Cause of the Error
Key sequence or operation procedure error
The operation requires a Manager Intervention.
The drawer must be closed before the operation.
No code has been entered where it is
compulsory.
Other errors
File receiving error (when a PC is connected).
A specified code has not been programmed at
the PLU entry.
Media pick up warning
Consignment compulsion error
The operation requires a slip print.
The receipt printer runs out of the paper.
Receipt cover open error
Journal paper retainer open error
The journal printer runs out of the paper.
Remote slip printer is off line status.
(The remote slip printer is off or the printer cable
is disconnected.)
No slip paper is set.
The [ST] key entry compulsion error
Salesperson entry compulsion error
Finalizing a Received-on-account entry is
attempted even when it is prohibited.
When the money declaration feature has been
selected, the issuance of the daily financial
report or prohibited reports is attempted prior to
performing the money declaration operation.
A price entry is attempted at the preset-price
department/PLU entry.
The open-price department/PLU entry without
the price entry is attempted.
Mode change is done while any operation is
performed.
The salesperson entry during a registration
operation is attempted even when it is
prohibited.
Total only error
Tender only error
The depressed key has been programmed with
the status of short-tendering prohibition.
The depressed key has been programmed with
the status of over-tendering prohibition.
Depress the [C] key, then retry to perform the
operation correctly.
Call your manager to perform the operation in
MGR mode.
Fully close the drawer.
Input a specified code.
Retry to perform PC communication.
Input the PLU code.
Call your manager.
Perform a consignment print operation.
Perform a slip print operation after finalizing a
sale.
Replace the receipt roll with a new one, then
depress the [C] key.
Fully close the receipt cover, then depress the
[C] key.
Fully close the journal paper ratainer, then
depress the [C] key.
Replace the journal roll with a new one, then
depress the [C] key.
When this error message is displayed, the [ITEM
CORR] key depression will let a confirmation
message displayed. By following the
confirmation message, the [ITEM CORR] key
depression will let the printer disconnected,
meanwhile the [C] key depression will let the
printer remain connected.
Set a slip paper on the remote slip printer.
Depress the [ST] key prior to finalizing a sale.
Prior to performing a registration operation, input
a salesperson code then depress the
[Salesperson] key.
Finalize a sale by media keys other than the
[R/A] key.
Call your manager to perform a money
declaration operation.
Depress the [PR OPEN] ([OPEN]) key, then
input a price.
Input a price, then perform the registration
operation.
Return the Mode Lock to a proper position.
Prohibition of the salesperson entry during a
registration operation has been programmed.
Contact your nearest TOSHIBA TEC
representative if necessary.
The depressed key has been programmed with
the total-only status. Contact your nearest
TOSHIBA TEC representative if necessary.
The depressed key has been programmed with
the tender-only status. Contact your nearest
TOSHIBA TEC representative if necessary.
Perform a registration operation so as not to
result in short-tendered amount.
Perform a registration operation so as not to
result in over-tendered amount.
5- 3
EO1-11154
5.1 LCD Display
Cancelling the Error