HP ProDesk 400 G1 Specification page 26

QuickSpecs
Technical Specifications - Hard Disk and Solid State Storage
HP 500-GB 7.2K rpm SATA 6.0Gb/s 3.5" Hard Disk Drive
Capacity
Rotational Speed
Interface
Buffer Size
Logical Blocks
Seek Time (typical reads,
includes controller overhead,
including settling)
Height (nominal)
Width (nominal)
Operating Temperature
HP 128 GB Solid State Drive
Unformatted Capacity
Architecture
Interface
Dimensions (W x H x D)
Weight
Bandwidth Performance
Latency
Power
Useful Drive Life
Environmental
(all conditions, non-condensing)
Regulations
* For solid state disk drives, GB means 1 billion bytes. 128GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity will vary by content
** The product achieves a mean time between failure (MTBF) based on population statistics not relevant to individual units.
500,107,862,016 bytes
7,200 rpm
Serial ATA 3.0 (6.0 Gb/s)
16 MB
976,773,168
Single Track:
Average:
Full-Stroke:
1 in/2.54 cm
Media diameter: 3.5 in/8.89 cm
Physical size: 4 in/10.2 cm
41° to 131° F (5° to 55° C)
128 GB*
Multi Level Cell (MLC) NAND
SATA 6 GB/sec
2.75 x 0.276 x 3.96 in (6.985 x 0.7 x 10.05 cm)
0.16 lb (73 g)
Sustained Sequential Read:
Sustained Sequential Write:
Random Read (4KB):
Random Write (4KB):
Read:
Write:
DC power requirement:
Total power consumption:
1.2 million device hours**
Operating Temperature:
Relative Humidity (operating):
Shock:
UL, CSA, EN 60950-2000, CISPR Pub 22 Class B, CNS 13438, AS/NZS
CISPR 22:2002 Class B, Korea KCC, CE Mark
DA - 14693 North America — Version 5 — February 13, 2014
HP ProDesk 400 G1 Business Series Desktop
2.0 ms
11 ms
21 ms
Up to 450 MB/ss
Up to 260 MB/s
up to 46K IOPs
up to 56K IOPs
55ms (TYP)
55ms (TYP)
Min 4.5 V; Max 5.5 V
160 mW (Active) ; <85 mW; (Idle)
32° to 158° F (0° to 70° C)
5% to 95%
1,500 G/1.0 msec
Page 26