Part Names and Functions
Front / Top
•
Horizontal lens adjustment
dial
p.16
Turn the dial to move the position of the
projection image to the left or right.
•
Lamp cover
Open this cover when replacing the
lamp inside.
•
Zoom ring
p.16
Adjusts the image size.
•
Air exhaust vent
A discharge outlet for the air
which cools the inside of the
projector.
Do not place anything that can
become warped or damaged by
heat near the exhaust vents. Do
not bring your hands or face
close to the vents while
projection is in progress.
•
Front adjustable feet
Extend to adjust the projection angle
so that the projector is horizontal
when placed on a desk top.
Control panel
Buttons with no explanation function in the same way as the corresponding buttons on the remote
control. Refer to "Remote control" for further details on these buttons.
Top control panel
•
Power button
p.14, 15
•
Source button
Displays a list of input
sources and switches to
your desired input source.
•
Warning indicator
Flashes or lights in different colors to
indicate problems with the projector.
6
p.48
p.17
•
Lens cover
When not using the projector, attach this to the
lens to protect the lens from damage and dirt.
p.15
p.37
•
Remote control light-
receiving area
Receives signals from the
remote control.
Side control panel
•
Menu button
•
Enter/Line menu button
p.18, 24, 26
p.13
•
Top control panel
See below
•
Vertical lens adjustment
dial
p.16
Turn the dial to move the
position of the projection
image up or down.
•
Side control panel
See below
•
Focus ring
Adjusts the image focus.
•
Projection lens
Projects images from here.
•
Remote control light-
receiving area
Receives signals from the
remote control.
p.26
•
Esc button
p.18, 20, 26
•
button
p.18, 20, 22, 26
p.16
p.13