When The Expected Images Are; Not Projected; Turning The Power Off - Epson Dreamio EH-TW3600 User Manual

When the expected images are not projected
If more than one signal source has been connected, or if no images are projected, use the remote control or the
projector's control panel buttons to select the signal source. For video devices, press the [Play] button on the video
equipment first, then select the signal source.
Using the remote control
When the expected images are not
projected

Turning the power off

Press the button that has the name of the port on it that
the desired signal source is connected to.
When the color of the image projected from the [Component] input port is
When the expected images are not
unnatural, select an appropriate signal according to the signal from the device
connected at "Input Signal" in the Configuration menu.
TIP
projected
Turning the power off
Turning the power off
Turn the power off for the signal sources
that are connected to the projector.
Press on the remote control or
the projector's control panel.
A standby confirmation message will be
displayed, so press
You can select whether the standby confirmation
message is displayed (On) or not displayed (Off) in
the Configuration menu.
If it is set to Off, the power will turn off with a single
button operation. p.34
on
or once more.
Starting and Stopping Projection
Using the control panel
When you press , the menu is displayed.
Each press of moves the pointer. Move the
pointer to the target input source to select it.
The input source is automatically switched when no
operations are performed about three seconds with
placing pointer at the target input source. You can
also press to switch to the target source.
p.35
When cool-down (approximately 16 seconds)
is completed, flashing around the
and you can then turn off the main power
switch.
Simply pressing or
electricity consumption.
Attach the lens cover.
If the projector is suspended from a ceiling and the
lens cover is left removed, the lens cover will still be
needed if the projector is moved anywhere, so keep
it in a safe place.
stops
does not stop
15