GE RHM 15 Specifications page 8

Basic Order Code RHM 15
Sensor Size
Temperature Rating
T1 NT from -20°C to +120°C (standard)
TA ET from -45°C to +120°C
T2 ET2 Extended Temperature Range from -45°C to +210°C
T3 ET1 Extended Temperature Range from -196°C to +50°C
T4 HT High Temperature Range from 0°C to +350°C
Pressure Range of Measuring Loops @ 120°C and M1 Material
P1
P2
P3
Construction Type (pmax indications @ 120°C)
RHM15 - -
g
© 2013 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product
names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.
pmax = 150 bar, max. CL 600 / PN40 (standard)
pmax = 300 bar
pmax = 450 bar-
PM0 Parallel Measuring Loops with removable Manifold and PTFE Seals,
pmax = 230 bar with thread connection, 214 bar with flange connection
SM0 Serial Measuring Loops with removable Manifold and PTFE Seals,
pmax = 230 bar with thread connection, 214 bar with flange connection
PH0 Parallel Measuring Loops with High Pressure Manifold and PTFE Seals, pmax = 420 bar
PF0 Parallel Measuring Loops Seal Less Version
SF0 Serial Measuring Loops Seal Less Version Sanitary, pmax = 42.9 bar
upon request, a fully welded version is available, pmax = 325 bar
PFT Parallel Measuring Loops Seal Less Version for Thread Connection, pmax = 250 bar
Material of Wetted Parts
M1 Measuring Loops and Manifold/Connection 1.4571 (316Ti) (standard)
M3 Measuring Loops and Connection Part 2.4602 (Alloy C22), Seal Less Construction only
M4 Measuring Loops and Connection Part Tantalum, PF0 Construction Type only
Process Connection
D1 Flange DIN DN25/PN40 Form C (EN 1092-1 Form B1)
D2 Flange DIN DN25/PN100 Form E (EN 1092-1 Form B2)
C1 Flange DIN DN40/PN40 Form C (EN 1092-1 Form B1)
C2 Flange DIN DN40/PN100 Form E (EN 1092-1 Form B2)
A1 Flange ANSI 1" 150# RF/SF
A2 Flange ANSI 1" 300# RF/SF
A3 Flange ANSI 1" 600# RF/SF
R3 Flange ANSI 1" 1500# RTJ
F1 Flange ANSI 1 ½" 150# RF/SF
F2 Flange ANSI 1 ½" 300# RF/SF
F3 Flange ANSI 1 ½" 600# RF/SF
F5 Flange ANSI 1 ½" 1500# RF/SF
R4 Flange ANSI 1 ½" 1500# RTJ
F4 Flange ANSI 1 ½" 2500# RF/SF
R5 Flange ANSI 1 ½" 2500# RTJ
G1 Female Thread G 3/4"
N1 Female Thread 3/4" NPT
W1 Swagelok 3/4" Tube inlet (SS-1210-1-12W), standard material only
S0 Sanitary 1" Triclamp, DIN 32676, pmax = 17.2 bar @ 120°C
S2 Sanitary NW20, DIN 11851, pmax = 40 bar @ 120°C
Others on request
- -
www.ge-mcs.com
920-498A