Sirius Satellite Radio Stratus 9 User Manual page 38

that you are receiving the SIRIUS signal. There should at
least be one bar on the upper right corner of the main
display screen that denotes antenna signal strength. You
can also press and hold menu and then press
to and highlight Signal. Press the Select button. The
Satellite and Terrestrial bars show the strength of the
signal being received (see Figure 19 ). If the signal recep-
tion is good, press and hold menu to return to the main
display screen. You are ready to make
the audio connection.
6. Ensure that the Stratus 6 is tuned to
channel 184. Upon power up, the Stratus
6 should tune to channel 184 by default,
when it's not yet activated. If it's not on
channel 184, refer to "Operation" on
page 49 to learn about how to tune a channel.
7. Turn on your vehicle's stereo system. Set it to play input from the auxiliary input
source.
8. You should hear SIRIUS channel 184 through your vehicle's stereo system. You are
now ready to subscribe your Stratus 6.
9. The audio level output of the Stratus 6 can be increased or decreased as necessary
to match the audio levels of other sources in your vehicle. Refer to "Audio Level"
on page 60.
If the signal reception is good, but there is no audio when tuned to channel 184, be sure
the vehicle's stereo system is set to the correct source, i.e., auxiliary input source (step
7). Also be sure that the audio level is set high enough to be heard (step 9). Refer to
"Troubleshooting" on page 67 for additional help.
[
38
Installation
]
to scroll
Figure 18
Figure 19