Table of Contents
Advertisement
Configure Frame Lock Master
To enable Frame Lock on the master open the Synchronize Displays tab in the NVIDIA
Control Panel.
Open the NVIDIA Control Panel and select Synchronize Displays
1.
Select "The timing server is On this system" radio button
2.
Note: Master node refers to the node that is used as the Timing Server. There can
only be one Timing Server in a cluster. All others nodes are commonly referred to
as "clients" or "slaves."
If the system has multiple displays, the driver automatically selects the primary
display to be the timing server and all other displays are the clients. To change the
configuration, click the icon of the display that you want to be the timing server
Press Apply.
3.
Quadro Sync
Frame Lock Configuration
DU-06574-001_v01 | 14
Advertisement
Table of Contents
