Opening The Door - Travis Industries Allegiance Owner's Manual

Direct vent freestanding stove
Table of Contents

Advertisement

Installation

Opening the Door

WARNING: The front of the stove becomes very hot during operation. Let the
stove cool completely before conducting service.
With both pawls free of the brackets, the
door may be swung open.
Travis Industries
(for qualified installers only)
Swing both side
panels open.
Open both latches
Door Frame
When securing the door, make sure the pawl fits into
the slot on the bracket before tightening.
NOTE: If the door latch becomes loose (usually because
of the door gasket flattening) the door latch can be
tightened by loosening the two nuts holding the bracket
and shifting the bracket to the positions shown below.
Tighter
4041220
Bracket (attached to side
of heater)
Pawl
Tightest
9 3 5 0 8 1 2 3
19

Advertisement

Table of Contents
loading

Table of Contents