Ford C-MAX HYBRID Owner's Manual page 227

5. Turn the bulb holder counterclockwise
and remove it.
6. Install the new bulb in reverse order.
E162553
1. Remove the screws from the splash
shield at the wheel well to gain access
to the lamp assembly.
E142799
2. Remove the bulb holder from the lamp
assembly by turning it
counterclockwise.
3. Disconnect the electrical connector.
4. Remove the bulb from the bulb holder
by pulling it straight out.
Install the new bulbs in reverse order from
the steps above.
C-MAX (CCG)
Maintenance
Replacing Tail, Brake and Turn
Signal Bulbs
E162555
1. Make sure the headlamp control is in
the off position.
2. Open the liftgate.
3. Remove the trim panel cover.
E162556
4. Disconnect the electrical connector
5. Remove the wing nut.
6. Gently pull the lamp assembly away
from the vehicle.
225