Windscreen Washers; Rear Window Wiper And Washers - Ford TRANSIT CUSTOM Owner's Manual

Hide thumbs Also See for TRANSIT CUSTOM:
Table of Contents

Advertisement

Note: Wet road conditions can cause
unexpected wiping or smearing.
To reduce smearing we recommend the
following:
Lower the sensitivity of the autowipers.
Switch to normal or high speed wipe.
Switch the autowipers off.
A
High sensitivity
B
On
C
Low sensitivity
The wipers will function when moisture is
detected on the windscreen. The rain
sensor will continue to monitor the amount
of moisture on the windscreen and adjust
the speed of the wipers automatically.
Use the rotary control to adjust the
sensitivity of the rain sensor. With low
sensitivity, the wipers will operate when
the sensor detects a large amount of
moisture on the windscreen. With high
sensitivity, the wipers will operate when
the sensor detects a small amount of
moisture on the windscreen.
Keep the outside of the windscreen clean.
Sensor performance will be affected if the
area around the interior mirror is dirty. The
rain sensor is very sensitive and the wipers
may operate if dirt, mist or flies hit the
windscreen.
Transit Custom (TTF) Vehicles Built From: 14-01-2013
Wipers and Washers

WINDSCREEN WASHERS

Note: Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
Note: Do not operate the washers for more
than 10 seconds at a time.
The washers will spray for as long as you
pull the lever toward you. When you
release the lever, the wipers will operate
for a short time.
REAR WINDOW WIPER AND
WASHERS
Rear Window Wiper
38
A
Intermittent wipe
B
Low speed wipe

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents