Ford SUPER DUTY Owner's Manual page 249

Hide thumbs Also See for SUPER DUTY:

Table of Contents

5. Release the three clamps that secure

the cover to the air filter housing. Push

the air filter cover toward the center of

the vehicle and up slightly to release it.

6. Remove the air filter element from the

air filter housing.

Install the new air filter element.

8. Replace the air filter housing cover and

secure all the clamps. Be careful not

to crimp the filter element edges

between the air filter housing and cover

and ensure that the tabs on the edge

are properly aligned into the slots.

9. Slip the air tube onto the air filter

housing and tighten the air-tube clamp

bolt snugly. Do not over tighten

air-tube clamp bolt.

Super Duty (TFA)

Reconnect the mass air flow sensor

electrical connector to the outlet

tube. Make sure the locking tab on

the connector is in the "locked"

position (connector shown from

below for clarity).

Troubleshooting

2014 super duty