Ford SUPER DUTY Owner's Manual page 243

1. Using masking tape or a marker, make
an alignment mark between one of the
grille brackets and the vehicle radiator
support to ensure correct grille
alignment during the installation
procedure. Do not scratch the black
coating from the radiator support.
2. Remove the two grille to headlamp
assembly push pins and the four bolts
attaching the top of the grille to the
radiator support.
3. Pull the top of the grille forward to gain
access to the lower grille spring clips.
4. Depress the spring clips through the
lower inner grille access openings using
a flat head screwdriver.
5. Pull the grill straight out to remove.
E163822
6. Remove the four bolts from the
headlamp assembly.
Super Duty (TFA)
Maintenance
E163821
240
7. Pull the assembly straight out
disengaging one snap clip from the
fender.
8. Disconnect the electrical connector by
squeezing the release tab and pushing
the connector forward, then pulling it
rearward.
E163823
9. For the headlamp bulb, remove the
bulb by turning it counterclockwise and
pulling it straight out.