Replacing Front Parking Lamp/Turn Signal/Sidemarker Bulbs; Replacing Tail/Brake/Turn Signal/Backup Lamp Bulbs - Ford F150 Owner's Manual

Lights

Replacing front parking lamp/turn signal/sidemarker bulbs

1. Make sure the headlamp control
is in the OFF position and open the
hood.
2. At the top and inboard side of the
headlamp, loosen the three retaining
screws.
3. Once the three retaining screws
have been removed, disengage the
tab at the top center of the
headlamp assembly by lifting it up.
4. Slide the headlamp assembly
forward disconnecting the snap
attachment at the fender.
5. Remove bulb socket from the
lamp assembly by turning it
counterclockwise and then pull the
bulb straight out.
Install the new bulb(s) in reverse order.

Replacing tail/brake/turn signal/backup lamp bulbs

1. Make sure the headlamp control
is in the OFF position.
2. Open the tailgate to expose the
lamp assembly screws and remove
the two screws from the tail lamp
assembly.
50
2004 F150 (f12)
Owners Guide (post-2002-fmt)
USA English (fus)