Download Print this page

Compaq FastTrak100 TX2 ATA-100 Specification page 2

Ata/100 dual channel raid controller

Advertisement

QuickSpecs
S
P E C I F I C A T I O N S
Drive support
Controller data channels
Data transfer rate
RAID levels
Data protection
PCI bus support
Disk array support
Utilities
Advanced monitoring
Operating system compatibility
Kit contents
Compaq PCs use genuine Microsoft Windows
www.microsoft.com\piracy\howtotell
©2002 Compaq Information Technologies Group, L.P. All rights reserved. Compaq, the Compaq logo, and Evo are trademarks of Compaq Information
Technologies Group, L.P. in the U.S. and/or other countries. Windows NT is a trademark of Microsoft Corporation in the U.S. and/or other countries. Promise,
FastTrak100, BIOS-level FastBuild and SuperSwap are trademarks of Promise Technology, Inc., in the U.S. and other countries. All other product names
mentioned herein may be trademarks of their respective companies. The information in this publication is subject to change without notice.
DA-11326
World Wide — Version 2 — February 27, 2002
Ultra ATA/100 drives; backwards-compatible with older Ultra ATA and EIDE drives
Two independent channels assure maximum performance of each attached drive
Up to 266 MB/s (depending on drive speed, use of multiple drives, and presence of 66-MHz PCI bus)
RAID 0 striping of up to four drives for performance; RAID 1 mirroring of two drives for fault tolerance; RAID 0+1
striping/mirroring of 4 drives
Mirrors data to second drive or drive pair on-the-fly; allows "hot" swap of a failed drive and rebuilds data in
background for continuous computer operation
Compatible with 66-MHz PCI motherboards, automatically backward-compatible with 33-MHz
Supports up to four arrays with different RAID levels; different arrays are selectable and bootable
FastCheck GUI
FastBuild BIOS auto-menu
Supports DMI for array monitoring through network, monitors S.M.A.R.T. status of attached hard drives, logs
array errors and events to Microsoft Windows NT 4.0/2000/XP event log
Microsoft Windows 95/98, Microsoft Windows Me, Microsoft Windows XP, Microsoft Windows NT 4.0, Microsoft
Windows 2000, Novell NetWare 3.12/4.1x/5.x
Promise FastTrak100 TX2 RAID Card, user manual CD, driver CD
FastTrak100 TX2 ATA/100
Dual Channel RAID Controller
Monitors the status of FastTrak100 TX2 arrays, attached hard drives, and any
installed SuperSwap enclosures in Microsoft
allows rebuilds of mirrored arrays, synchronizes hard drives
Provides auto configuration and drive speed optimization; view/create/delete
arrays; rebuilds failed arrays
®
Windows
®
; warns of drive failure,
2

Advertisement

loading

This manual is also suitable for:

Promise fasttrak100 tx2