Connecting The Enclosure - Dell POWERVAULT MD1200 Technical Manualbook
Hide thumbs
Also See for POWERVAULT MD1200:
- Getting started with (125 pages) ,
- Getting started (55 pages) ,
- Rack installation instructions (2 pages)
Table of Contents
Advertisement
Enclosure
Dell™ PowerVault™ MD1200
Dell™ PowerVault™ MD1220
5.8 Connecting the Enclosure
Dell™ PowerVault™ MD1200 and MD1200 enclosures standardize on the 6Gb/s (SAS 2.0) Mini-SAS
cable (SFF 8088). The Mini-SAS cable is unique from the SAS cable used with the previous generation
Dell™ PowerVault™ MD1000 and MD1120 enclosures. See transition comparison in Figure 12.
•
Connectors on both ends of the SAS cable are universally keyed. Either end of the cable can
be connected to the EMM or the RAID controller.
•
To remove the SAS cable, pull the pull-tab to release the cable from the connector on the EMM
and the host system. See Figure 13.
** Available in Q3 2010
Table 11.
Split Mode Configuration
Drives 6 to 11
Drives 12 to 23
Figure 12. Mini-SAS Cable Transition
EMM0
Drives 0 to 5
Drives 0 to 11
EMM1
19
Hide quick links:
Advertisement
Table of Contents
