Video; Graphics Video Modes - Dell PowerEdge R815 Technical Manual

Hide thumbs Also See for PowerEdge R815:
Table of Contents

Advertisement

Dell

12 Video

The
Dell™ PowerEdge™
integrated video subsystem, connected to the 32-bit PCI interface of the SP5100. This logic is based
on the Matrox G200. The device only supports 2D graphics.
The video device outputs are multiplexed between the front and rear video ports. If a monitor is
connected to the front video connector, it will take precedence over the rear connection, thereby
removing the display from the rear connection.
The integrated video core shares its video memory with the iDRAC6's 128 MB DDR2 application space
memory. This memory is also used for the KVM buffer.
The PowerEdge R815 system supports the 2D graphics video modes shown in Table 14.
PowerEdge R815 Technical Guide
R815 Integrated Dell Remote Access Controller 6 (iDRAC6) incorporates an
Table 16.
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024*
1280 x 1024*
*These resolutions are supported through the back video connector only.
2D Graphics Video Modes
Refresh Rate (Hz)
60, 72, 75, 85
56, 60, 72, 75, 85
60, 72, 75, 85
75
60, 75, 85
60
Color Depth
(bit)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16
32
42

Advertisement

Table of Contents
loading

Table of Contents