Axis Q6044–S User Manual page 28

Ptz dome network camera

Hide thumbs Also See for Q6044–S:

Table of Contents

AXIS Q6044–S PTZ Dome Network Camera

Live View Config

Note

To enable this setting at least one I/O port must be configured as an output port. See I/O Ports, on page 54.

To display output buttons in the Live View page:

1. Go to Setup > Live View Config.

2. Under Output Buttons, select the type of control to use:

Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60

seconds.

Active/Inactive displays two buttons, one or each action.

To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port's Normal state.

For more information about I/O ports, see I/O Ports, on page 54.

Table of Contents