Connectors - Axis M3025–VE User Manual

AXIS M3025–VE Network Camera
Technical Specifications
Item
Function/group
Included
accessories
Video
management
software

Connectors

I/O connector
4–pin terminal block for:
• Auxiliary power (DC output)
• Digital Input
• Digital Output
• 0 V DC (-)
Function
0 V DC (-)
DC output
Digital Input
Digital Output
Specifications
Drill hole template, Installation Guide, Installation and Management Software CD,
Windows decoder 1-user license, Torx L-key, terminal block connector
AXIS Camera Companion (included), AXIS Camera Station and video management
software from Axis' Application Development Partners (not included). See
www.axis.com/products/video/software
Pin Notes
1
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3
Connect to pin 1 to activate, or leave floating (unconnected)
to deactivate.
4
Connected to pin 1 when activated, floating (unconnected)
when deactivated. If used with an inductive load, e.g. a relay,
a diode must be connected in parallel with the load, for
protection against voltage transients.
55
Specifications
12 V DC
Max load = 15 mA
0 to max 30 V DC
0 to max 30 V DC, open drain,
100 mA