Setup; Optional Installation Services; Optimum Environment; Temperature Requirements - HP ProLiant MicroServer User Manual

Setup

Optional installation services

Delivered by experienced, certified engineers, HP Care Pack services help you keep your servers up and
running with support packages tailored specifically for HP ProLiant systems. HP Care Packs let you integrate
both hardware and software support into a single package. A number of service level options are available
to meet your needs.
HP Care Pack Services offer upgraded service levels to expand the standard product warranty with
easy-to-buy, easy-to-use support packages that help you make the most of your server investments. Some of
the Care Pack services are:
•
Hardware support
6-hour call-to-repair
o
4-hour 13x5 same day
o
4-hour 24x7 same day
o
4-hour same business day
o
•
Install services for hardware
For more information on Care Packs, see the HP website (http://www.hp.com/services/carepack).

Optimum environment

When installing the server, select a location that meets the environmental standards described in this section.

Temperature requirements

To ensure continued safe and reliable equipment operation, install or position the system in a well-ventilated,
climate-controlled environment.
The maximum recommended ambient operating temperature (TMRA) for most server products is 35°C
(95°F). The temperature in the room where the rack is located must not exceed 35°C (95°F).
CAUTION:
Do not permit optional equipment to impede airflow around the server or to increase the
•
internal rack temperature beyond the maximum allowable limits.
Do not exceed the manufacturer's TMRA.
•

Power requirements

Installation of this equipment must comply with local and regional electrical regulations governing the
installation of information technology equipment by licensed electricians. This equipment is designed to
operate in installations covered by NFPA 70, 1999 Edition (National Electric Code) and NFPA-75, 1992
To reduce the risk of damage to the equipment when installing third-party options:
Setup 8