Removal And Replacement Tools; Server Warnings And Cautions - HP ProLiant MicroServer User Manual

Removal and replacement tools

In performing any hardware configuration procedures, you might need the following items:
•
System screwdriver (secured to the front panel door)
All hardware screws used in the server can be removed or fastened by using the system screwdriver.
•
Spare screws, located on the back side of the front panel door.
The following references and software tools might also be used:
•
IPMI Event Log
•
Diagnostics software

Server warnings and cautions

WARNING:
system components to cool before touching them.
CAUTION:
achieved when the system covers are removed.
CAUTION:
to internal components, HP recommends that you first back up all server data to avoid loss.
To reduce the risk of personal injury from hot surfaces, allow drives and internal
The server must always be operated with the system covers on. Proper cooling is not
When installing hardware or performing maintenance procedures requiring access
Hardware options installation 12