Table of Contents
Advertisement
b.
Remove the display hinges (4).
The display hinges are included in the Display Hinge Kit, spare part number 740147-001.
12.
If it is necessary to replace the WLAN antenna cables and transceivers:
a.
Detach the WLAN antenna transceivers (1) from the display enclosure. (The WLAN antenna
transceivers are attached to the display enclosure with double-sided adhesive.)
b.
Release the WLAN antenna cables (2) from the routing clips built into the bottom edge of the
display enclosure.
48
Chapter 4 Removal and replacement procedures preliminary requirements
Hide quick links:
Advertisement
Table of Contents
