Table of Contents
Advertisement
Reverse this procedure to install the RJ-45 connector.
Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.
Disconnect all of the external devices that are connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Service cover (see
b.
Hard drive (see
c.
Keyboard (see
d.
Top cover (see
e.
System board (see
f.
Heat sink (see
Remove the fan:
ENWW
Battery on page
32).
Hard drive on page
Hard drive on page
33).
Keyboard on page
43).
Top cover on page
45).
System board on page
Heat sink assembly on page
33).
55).
58).
Component replacement procedures
Spare part number
611688-001
63
Hide quick links:
Advertisement
Table of Contents
