Cisco TelePresence SX20 Quick Set Administrator's Manual page 68

Cisco TelePresence SX20 Quick Set
AdministrAtor guide
Table of contents Introduction
Experimental SystemUnit SoftwareUpgrade RequireAuthentication
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental SystemUnit SoftwareUpgrade RequireAuthentication:
Off
Experimental SystemUnit CrashReporting Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Off/On>
Example: Experimental SystemUnit CrashReporting Mode: Off
Experimental SystemUnit CrashReporting URI
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <S: 0, 255>
Example: Experimental SystemUnit CrashReporting URI: ""
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings Appendices
68
www.cisco.com