Local Layout Control - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
AdministrAtor guide
Table of contents Introduction
Local layout control
You can select a local layout using the Call Control page.
The term layout is used to describe the various ways a video
conversation appear on screen. Different types of meetings
will require different layouts.
Each layout will typically specify a screen layout well suited
when you are not in a meeting or you are in a meeting with
one, two or three parties; when the meeting does or does not
involve a second video stream for presentations; when the
screen aspect ratio is 4:3 or 16:9.
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced settings
Select a layout
Select your preferred layout in the
drop down menu. You may change
the layout while in a call.
Call Control
Appendices
18
www.cisco.com