Cisco TelePresence SX20 Quick Set
AdministrAtor guide
Table of contents
Introduction
XML files
The XML files are structured in a hierarchy building up a
database of information about the codec.
Click the file names to open the corresponding file.
• Select
configuration.xml
to see an overview of the system
settings, which are controlled from the web interface or
from the API (Application Programmer Interface).
• The information in
status.xml
is constantly updated by the
system to reflect system and process changes. The status
information is normally monitored from the API.
• Select
command.xml
to see an overview of the commands
available to instruct the system to perform an action. The
commands are issued from the API.
• Select
valuespace.xml
to see an overview of all the value
spaces used in the system settings, status information, and
commands.
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface
Web interface
Advanced settings
Diagnostics
System Information
Log Files
XML Files
Appendices
12
www.cisco.com
Need help?
Do you have a question about the TelePresence SX20 Quick Set and is the answer not in the manual?
Questions and answers