Date/Time Menu - Lenovo ThinkPad T430u User Manual

Table 4. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)
CPU

Date/Time menu

If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
program main menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change the date or time.
2. Press Tab, Shift+Tab, or Enter to select a field.
3. Type the date or time.
Notes: Another way to adjust the date and time is pressing the following keys:
• F5 or –: Change to a lower value.
• F6 or the combination of Shift and +: Change to a higher value.
4. Press F10 to save the changes and restart the system.
Submenu item
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Core Multi-Processing
®
Intel Hyper-Threading
Technology
Selection
• 2 hours
• 3 hours
• Disabled
• Enabled
• Disabled
• Enabled
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
Chapter 7
Comments
Enables or disables the
password beep when the
system is prompting for
the power-on, hard disk, or
supervisor password to be
typed.
Enables or disables the
keyboard beep when
unmanageable key
combinations are pressed.
Select SATA controller
operation mode. If you
select Compatibility, the
SATA controller operates in
compatibility mode.
Enables or disables
additional execution core
units within a CPU.
Note: If you are using a
computer with a single-core
microprocessor, this item is
not available.
Enables or disables
additional logical
microprocessors within
a microprocessor core.
.
Advanced configuration
91