Lenovo ThinkPad T430u User Manual page 104

Table 4. Config menu items (continued)
Menu item
USB
88
User Guide
Submenu item
Ethernet LAN Option ROM
UEFI PXE Boot Priority
Wireless LAN Radio
USB UEFI BIOS Support
USB 3.0 Mode
Selection
• Disabled
• Enabled
• IPv4 First
• IPv6 First
• On
• Off
• Disabled
• Enabled
• Disabled
• Enabled
• Auto
Comments
function is enabled with any
power sources.
Note: It is required to use
ac power with the magic
packet type Wake on LAN
function.
Note: The Wake on LAN
function does not work
when a hard disk password
is set.
Loads the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
Select Network Stack
priority for UEFI PXE Boot.
If you select On, the internal
wireless radio is turned on.
If you select Off, the internal
wireless radio is turned off.
Enables or disables boot
support for USB diskette
and USB CD-ROM.
Set the USB 3.0 controller
mode for the connectors
shared between USB 2.0
and USB 3.0 controllers.
If you select Auto, it enables
you to connect and route
appropriate USB 3.0 and
USB 2.0 connectors.
If you select Enabled, it
enables USB 3.0 mode
and allows USB 3.0 to be
supported in the operating
system.
If you select Disabled, it
disables and hides the USB
3.0 controller, and USB 3.0
connectors will work in USB
2.0 mode.