Config Menu - Lenovo ThinkPad T430u User Manual

• System board serial number
• Asset Tag
• CPU Type
• CPU Speed
• Installed memory
• UUID
• MAC address (Internal LAN)

Config menu

If you need to change the configuration of your computer, select Config from the ThinkPad Setup program
main menu.
The following submenu is displayed:
• Network: Set the LAN related functions.
• USB: Enable or disable USB related functions.
• Keyboard/Mouse: Set the keyboard and mouse related functions.
• Display: Specify the settings for display output.
• Power: Set power management related functions.
• Beep and Alarm: Enable or disable the audio related functions.
• Serial ATA (SATA): Specify the settings for the hard disk drive.
• CPU: Specify the settings for the microprocessor.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• On each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.
The following table shows the contents of the Config menu.
Notes:
• Some items are displayed on the menu only if the computer supports the corresponding features.
• Default values are in boldface.
Table 4. Config menu items
Menu item
Network
Submenu item
Wake On LAN
Selection
• Disabled
• AC Only
• AC and Battery
Chapter 7
Comments
Enables the system to
power on when the Ethernet
controller receives a magic
packet.
If you select AC Only, the
Wake on LAN function is
enabled only when the ac
power adapter is attached.
If you select AC and
Battery, the Wake on LAN
.
Advanced configuration
87