Hitachi RAS-13EX9G Instruction Manual page 34

MAINTENANCE (continued)
Method of Removing the Top Grill
Removing the Top Grill
1 Lift up while pressing the top grill and remove
the stoppers.
2 Pull forward (both left and right grills).
1
CAUTION
• Do not splash or direct water to the body of the unit when cleaning it as this may cause
short circuit.
• Consult your dealer when cleaning the interior of the air conditioner.
• Do not climb on any unstable object during cleaning
You may fall or topple down and this could result in injury.
• Wear gloves during cleaning
Cleaning without gloves could cause direct contact with internal part and result in injury.
Cleaning the Heat Exchanger of the Indoor Unit
When cleaning the heat exchanger of the indoor unit using air-conditioner interior cleaner, attach
the cover provided with the accessory "SP-SSP2" to the front surface of the heat exchanger. For
cleaning details, refer to the instructions provided with "SP-SSP2".
CAUTION
• Do not use any cleaner other than the accessory "SP-SSP2".
Use of other type of cleaner could cause wet wall or furniture, water dripping, electrical
shock and/or failure.
• Do not climb on any unstable object during cleaning
You may fall or topple down and this could result in injury.
• Wear gloves during cleaning
Cleaning without gloves could cause direct contact with internal part and result in injury.
• Spilling of cleaner onto electrical parts could cause electrical shock and/or failure.
RAS13EX9G_EN(25-40).p65
(How to open and close the front panel, refer to page 5.)
Stoppers
2
–
34
Attaching the Top Grill
1 Push and slide the top grill along the top of
the indoor unit so that the "UP" indication
goes to the back of the unit.
2 Press the top grill down and affix with the
stopper. (The shapes of the left and right
grills are different)
1
34 –
3/8/07, 2:46 PM
2