Hitachi RAS-13EX9G Instruction Manual page 24

2
Press the (TIME) button. The time indication starts lighting instead of blinking.
2
Set the turn-off time
with the TIMER control
button.
2
Set the turn-off time
with the TIMER control
button.
4
Set the turn-off time
with the TIMER control
button.
• The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the
current time at first because it serves as a reference.
• As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button in order to use the same settings next time.
RAS13EX9G_EN(11-24).p65
• The time indication will disappear automatically in 10 seconds.
• To check the current time setting, press the
The setting of the current time is now complete.
3
Point the signal window of the remote controller toward
the indoor unit, and press the
The (OFF) mark starts lighting instead of blinking and the
(RESERVED) sign lights. A beep occurs and the
lamp lights on the indoor unit.
Example:
The device will turn off at P.M.11:00.
The setting of turn-off time is now complete.
3
Point the signal window of the remote controller toward
the indoor unit, and press the
The (ON) mark starts lighting instead of blinking and the
(RESERVED) sign lights. A beep occurs and the
lamp lights on the indoor unit.
Example:
The device will turn off at A.M.7:00.
The setting of turn-on time is now complete.
5
Point the signal window of the remote controller toward
the indoor unit, and press the
The (ON) mark starts lighting instead of blinking and the
(RESERVED) sign lights. A beep occurs and the
lamp lights on the indoor unit.
Example:
For cooling and dehumidifying, it will
simply turned on at A.M.7:00. The
settings of the turn on/off times are now
complete.
– 24 –
24
(TIME) button twice.
(RESERVE) button.
(TIMER)
(RESERVE) button.
(TIMER)
(RESERVE) button.
(TIMER)
3/8/07, 2:44 PM